Description
What is rice milling machine?
The rice milling machine is mainly composed of fixed wrench, tightening nut wrench, brush, hopper, grinding wheel, wire brush and so on. The brown rice is peeled and whitened by the mechanical force produced by the mechanical equipment, which is called rice milling machine. As the name suggests, rice milling machine for home is a rice milling machine suitable for home use. They are generally small, simple to operate, do not take up too much space and are not too expensive.
How is the rice milled?
1. After the ancient rice was dried, the advanced blower was used to separate impurities such as grass seeds by wind. The clean rice is put into a stone mill to separate brown rice and rice husks. After the brown rice and rice husks are separated, they enter the blower to remove the rice husks, and the rest is yellow brown rice. The brown rice is then pounded with a stone mortar and a wooden pestle, and the wooden pestle hits the stone mortar to remove the yellow bran, and finally becomes white rice.
2. Rice is processed by modern equipment. After drying, the rice enters the rice mill and is rolled between two oppositely rotating rubber rollers. The rice husks will be crushed and fallen off under the rolling of the rollers. The brown rice separated from the rice husk enters the polishing machine, and the brown rice is tumbled and polished on the grinding wheel to remove the yellow bran on the surface, and it becomes white rice. The broken rice is separated by the machine, and the rice with the same size can be packaged and sold.
From the very beginning, humans chewed the whole rice grain, and then used the pestle and mortar to separate the rice husk and brown rice. With the development of technology, they began to use mechanical equipment to grind rice. The new equipment and new technology not only greatly improved the efficiency of rice milling, but also the taste is better. Now people no longer aim to fill their stomachs, the higher nutritional value of rice has begun to be discovered, and germ rice and fresh rice have begun to enter people’s lives and dining tables.
How does rice milling machine work?
When the brown rice flows from the hopper into the grinding chamber, the brown rice is squeezed into the whitening chamber due to the internal pressure of the pressing thallium and the push of the mechanical force. It can quickly remove the cortex of brown rice, and achieve the level of whiteness measured by white rice within the time determined by the adjustment.
Operation method of rice milling machine
1. Put the rice milling machine on the workbench smoothly and plug in the power plug.
2. Determine the whitening time and adjust the timing knob.
3. Take out the pressed thallium in the hopper, take 17-20g of brown rice (the moisture content should not exceed 15%), put it into the feed hopper, and let it flow into the whitening room. First press the power button to start, and then put down the pressure thallium.
4. When the specified time is reached, the rice mill will automatically stop, and the hopper will be taken out first to remove the bran skin. Then plug in the receiving hopper, then take out the pressure thallium, turn the front rotating handle to the right, so that the polished rice in the whitening room falls into the receiving hopper, turn the timing knob to 0, and press the power button to make the grinding wheel idle for a few seconds. All the rice grains in the whitening room are dropped, and then the rice hopper is pulled out, and the measured polished rice is obtained after sieving.
